Super glue with accelerator to piece it back together: Drill holes on either side of every crack: Scuff the entire back side with 3M pads: Tape the front side of cracks and fill the back side with two part 5 minute epoxy. Lay fiberglass strips into epoxy: Layer back side with high weight fiberglass cloth: [...]

The polisher itself: There are two model numbers for the Porter Cable dual action polisher. These are 7424 and 7336. The 7336 is sold as an orbital sander, but is the exact same tool as the 7424. Meguiars also sells the same polisher. The kit comes with one white finishing pad, but it is the [...]

If your car is like the three 4th gen. f-body’s outside my house, then the black area between the windshield and the hood is probably pretty faded and giving your car a somewhat worn look, which i personally don’t like. So, here is the cure: Materials: -Bondo restore black – around $10 -masking tape -small [...]

I wanted to make a 3D Bird in the door panels and recover the door panels with black microsuede. Here’s how I did it: 1) Remove the door panels and separate the cardboard backing from the rest of the door. 2) Strip the vinyl covering from the cardboard. 3) Using ½” high density foam, cut [...]

Well, as most of you know, the passenger floor board has the “hump” there. After numerous complaints from friends, women, and others, I decided to delete the hump once and for all. My friend did all the work. A plasma cutter, air tools, and welder made the job relatively easy. I guess the hardest part [...]

First thing is you have to get a few supplies: One being a Plastic adhesive. I got this one at Walmart for like $3. You’re also going to need a touch up kit for the panel itself. Depending on the severity of the crack, results will vary. I got this kit for about $8, again [...]